Results 1 to 5 of 5

Thread: Building a stove

  1. #1
    New Resident
    Join Date
    Jan 2014
    Posts
    2

    Building a stove

    I click on the stove I want and I get the message "build with a little help....." So I click on ok, but I just go right back to the design panel. I have room for the stove, why can't I get the box of parts to go on to the floor?

  2. #2
    Senior Moderator
    Join Date
    Mar 2011
    Location
    SoCal
    Posts
    7,415
    This thread has lots of good info
    Whenever you are having issues, try these two things first - restart your device,
    and delete and reinstall the app. Your progress is saved on TLs servers.
    Contact me by PM

  3. #3
    Executive Chef
    Join Date
    Nov 2013
    Location
    Land of Oz
    Posts
    1,579
    I used 2 have this problem all of the time until I discovered what I was doing wrong. Instead of clicking directly on the oven or hammer, point ur finger/stylus above it and that should solve ur problem. I also learned 2.click on the oven, leave my finger/stylus on the oven and drag it 2 the place I want it.

  4. #4
    Nightclub Owner meme1098's Avatar
    Join Date
    May 2012
    Location
    Texas
    Posts
    7,482
    Quote Originally Posted by Rooster49 View Post
    I click on the stove I want and I get the message "build with a little help....." So I click on ok, but I just go right back to the design panel. I have room for the stove, why can't I get the box of parts to go on to the floor?
    Tap in the upper left corner near the coin. You should then be able to place it on the floor.
    If you tap anywhere near the hammer, it just gives you that message.

  5. #5
    New Resident
    Join Date
    Jan 2014
    Posts
    2
    Thank you SO much, got it now!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •